The new Inorganic Ceramic Fiber Board (Non-calcined) contains extremely low organic matter. It will be smokeless, odorless, and its strength and hardness can increase when exposed to naked fire and high temperature. Using new production equipment, technology and formula, the new inorganic ceramic board has higher characteristic with more accurate size, delicate and surface, extremely low shot content, low thermal conductivity and small thermal shrinkage.

It can be cutted into corresponded size according to customer requirements, and can be processed by drillilng and cutting. It is an ideal environment friendly high temperature heat insulation board for wall hanging furnace, electric furnace and oven.

Five significant advantages:

1.5mm-200mm thickness, one-stage moulding

The size of traditional organic fiber board is 10mm-60mm, thinner one is fragile and has no strength, while thicker one is hard to dry and easy to moldy deformation as “cotton core”.

Non-calcined inorganic ceramic fiber board has excellent characteristics, such as high density and easy to dry. Which can make sure the high quality of fiber board while extremely thinner or thicker without deformation.

2.Extremely low organic content, <1.45%

The organic content of traditional organic fiber board is 7-9%, it can absorb moisture mildew easily, fire and smoke in higher temperature.

Non-calcined inorganic ceramic fiber board make use of high quality inorganic glue to achieve extremely low organic content, while avoid the problem of fire and smoke when using fiber board.

3.No calcination, smokeless, tasteless and colorless in higher temperature

If traditional organic fiber boards are required to be smokeless and odorless at higher temperatures, they must be calcined twice and then dipped again after moulded. These stages may result in high levels of organic matter. And the internal strength of the fiberboard cannot be guaranteed.

Non-calcined inorganic ceramic fiber board can be formed to one-stage moulding without secondary calcination by using high quality inorganic glue, which can be really smokeless, tasteless and colorless.

4.Higher strength, carving freely

Due to the characteristics of silica sol binder, the traditional organic fiber board can’t form high-density fiber board with one-stage moulding. The internal strength of fiber board can’t be guaranteed because it has to be dipped again after moulded.

Non-calcined inorganic ceramic fiber board can be formed to one-stage moulding and achieve the density of 400 or above. It has the same strength in the internal and external, and can be carved into any desired shape freely.

5.No mildew, no wastewater, environmental protection and energy saving

The traditional organic fiber board is easy to mildew because of starch using. And it will produce lots of poisonous wastewater that inevitably polluting the environment.

Non-calcined inorganic ceramic fiber board will not produce wastewater, cyclic utilization, truly achieve environmental protection and energy saving, while contributing to the cause of human progress.

This post is also available in Deutsch, Español, Français, العربية and 中文.